more 
English 
The zinc layer of pre galvanized EMT and IMC conduits is formed by electrolytic deposition, with limited adhesion and thickness, and is prone to detachment in the following environments:1. Wet or high humidity environmentLong term exposure to rainy, dew forming, or high humidity (relative humidity>8
READ MORE
Whether galvanized metal conduits will be burned out in flames depends on the temperature and duration of the flame, as well as the material and thickness of the conduit itself. Specific analysis can be conducted from the following aspects:1. High temperature resistance of galvanized layerThe surfac
READ MORE
In electrical wiring engineering, EMT (electrical metal conduit) and IMC (intermediate metal conduit) are two commonly used metal conduit, and the selection should be based on environmental requirements, protection level, and cost budget. Here is a comparison and selection suggestion between the two
READ MORE
American standard IMC and RMC pipes usually use NPT threads. NPT is a 60 degree cone pipe thread according to the American standard. The main reasons for using NPT threads are as follows:Good sealing performance: The taper design of NPT thread is 1:16, which can form a tight fit between the inner an
READ MORE American standard NPT thread is the abbreviation for National (American) Pipe Thread, which is the American standard for pipe threads. It belongs to the 60 degree cone pipe thread of the American standard. The following is a detailed analysis of American standard NPT threads:1、 Basic InformationProp
READ MORE
When bending RSC or IMC pipes, multiple tools can be used depending on factors such as pipe diameter, bending radius requirements, and construction conditions. Here are some commonly used bending tools and their characteristics:1. Manual pipe benderFeatures: Manual pipe bender is a relatively simple
READ MORE
IMC conduit, also known as Intermediate Metal Conduit, is a medium strength, thick walled metal corrugated pipe mainly made of steel strip and has a series of unique characteristics, making it widely used in the construction and industrial fields. The following are the main characteristics of IMC co
READ MORE The connection and installation of IMC conduit or RMC conduit usually follow a series of standard steps to ensure the safety and effectiveness of the electrical system. The following are general installation steps and precautions:1、 Preparation workConfirm specifications: Firstly, confirm the specif
READ MORE
RMC tube and IMC tube are two different types of metal conduits, which have significant differences in multiple aspects. The following is a detailed comparison of these two types of pipes:RMC (Rigid Metal Conduit)Definition and purposeDefinition: RMC is an abbreviation for Rigid Metal Conduit, which
READ MORE There are significant differences between IMC tubes and RMC tubes in multiple aspects. The following is a detailed comparison of the differences between them:Definition and purpose:IMC tube: IMC stands for Intermediate Metal Conduit, which stands for Intermediate Metal Conduit. It is a heavy-duty me
READ MORE